Understanding Color Variations Of Clear Anodized Aluminum

By Lorin Industries Inc.

Anodized aluminum exhibits a natural metallic beauty that makes it a preferred choice by designers and architects. The reason these finishes look like metal is because the anodize layer is transparent, allowing a clear view of the base aluminum to show through. All aluminum can be anodized. However, there are many different alloys (series) of aluminum which will produce different colors when anodized, depending on the particular alloy series and its constituents.

What causes color variation of anodize aluminum?

Aluminum has trace amounts of other alloys and elements such as (zinc, magnesium, silicon) present in the alloy. These other elements do not respond the same as the aluminum does during anodizing. Generally, the purer the aluminum alloy the more “clear” the anodized product will be. At Lorin we prefer to use AQ (Anodized Quality) alloys, mainly (5000 series). Of course, during the anodizing process there are other variables to consider such as pretreatment and anodize film thickness.

How can color variance be minimized?

Many specifiers and designers do not know that color variation experienced in the anodize process is mainly due to variances in the metals (alloy series) used. Different alloys anodize different colors.

Additionally, when ingots are cast at the mill and processed together to create the specific alloy there is a good level of consistency of appearance. That is why it is important to try to make sure to use the same, or consistent mill lots to create a high level of visual consistency. Conversely, when different mill lots are used, there can be differences in appearance even with clear anodized. With respect to the anodizing process, there are many anodizing conditions such as different acid concentrations, different operating temperatures, anodize additives and anodizing current density to name a few. With Lorin’s continuous coil process, every inch of the entire coil spends the same amount of time in each part of the process. This allows Lorin to create an unmatched level of consistency, assuring the colors and finishes look the same throughout the coils produced.

Installation

Another consideration in color variation is installation. The anodic layer is a translucent, crystalline structure like a sapphire and just like the gemstone, its appearance will vary with different light conditions and viewing angles. Panels need to be installed in parallel with the aluminum grain going all the same direction. Even a few degrees of deviation may cause a difference in appearance or non-uniformity.

Summary

To ensure the best color control it is important to use the same alloy, same anodizer and same lot of material (ingot of aluminum) when designing a project.

About Lorin Industries

Lorin Industries is a provider of coil anodized aluminum, made exclusively in the USA and used in various industries including architecture and construction. Family-owned for over 80 years, Lorin aluminum can be seen shining brilliantly on some of the world’s most iconic structures and designs, and, no matter the age, they are always radiant. Three times tougher than the raw material, anodized aluminum won’t chip, flake, peel, patina, rust, or weather. And to make things easy, Lorin cleans, anodizes, colors, seals, cuts, and delivers ready-to-fabricate coils all in one stop. A wide range of colors and finish options are available, along with several different patterns of perforated aluminum.

Anodized aluminum isn’t just one material. It’s one remarkable opportunity to access thousands of looks, textures, colors and finishes that reflect creativity, advanced technology and environmental responsibility. No one understands that technology and its potential better than Lorin Industries. To learn more, visit www.lorin.com.