Posted: Jun 23, 2015
The Importance Of Consensus In Building Standards - Part 1
Most people understand the purpose of a building code: To ensure the safety of the occupants and to establish the minimum accepted performance level of the building and its systems. Fewer people understand that because building codes are adopted into law by a governing body, technically referred to as an Authority Having Jurisdiction or AHJ, they are an in fact an extension of the law or ordinance that brings them into effect.
Posted: Jun 16, 2015
Benefits Of Insulated Metal Panels In Warmer Climates
There are so many great advantages that come with living in warm climates. Although the warm sun is a prime condition for a fun outdoor lifestyle, when it comes to all things indoors is where the trouble begins. An overbearing sun may be okay if you are laying out on a beach somewhere, but you don’t want the same conditions beaming into your building. This is why it is important to fortify your building with insulated metal panels (IMPs). It’s the best way to protect your building against intense summer rays.
Posted: Jun 09, 2015
IZA-Led Coalition Shows There's Strength In Numbers When It Comes To Affecting Public Policy
In 2012, the metal roofing industry caught wind of a rainwater runoff evaluation that was being planned by the Washington State Department of Ecology (Ecology) to supplement a 2011 investigation. Concerns over certain chemicals and metals in the Puget Sound were at the heart of the investigation. The intent of the project was to address chemicals and metals of concern in the rainwater runoff that were being detected in the Puget Sound.
Posted: May 19, 2015
All Metal Building And Roofing Screws Are Not Equal, Simply Stated - Part 2
Now that you have chosen the proper length for your application as described in Part 1 of this series, you now need to determine the proper type of fastener based upon the application. Carbon steel or stainless steel, painted or non-painted, capped head or molded head, washered or non-washered. The application will provide you the proper answer to each one of these choices as long as you know the differences.
Posted: May 12, 2015
Construction Practices Of Today Help Ensure Dire Predictions of Past Earth Day Celebrations Will Never Come True
There are many ways for metal to be used in building construction that can help to reduce the building’s impact on the environment. Sustainable building practice is designed to extend the life of the building by using recyclable materials and by lowering the use of energy and water. The move toward Net Zero energy in buildings is another example of how structures will be designed and maintained differently to achieve significant reductions in the electricity load on the building.
Posted: Apr 07, 2015
Focus On Resilience In Buildings And Beyond Gathering Momentum
Resilience is once again in the spotlight. As the environment changes around the globe and population continues to grow, the built community and designers will be challenged to create buildings that can withstand ever-changing conditions.
Posted: Mar 24, 2015
All Metal Building And Roofing Screws Are Not Equal, Simply Stated - Part 1
As important as knowing the differences in metal roofing products, it is more important to know the differences in the fasteners holding that roof in place. There seems to be a lack of knowledge about fasteners, not only among metal panel and metal building suppliers but also among the contracting community. It is extremely important to choose the proper fastener for the proper application so here are some things to consider.
Posted: Mar 17, 2015
Better By Design: The Case For Single-Component Wall Systems
As you look to construct a brand new building for your business, you browse the Internet for a few options, only to end up more confused than when you started. Choosing between brick and aluminum cladding systems isn’t such a tough decision, but there are some companies offering single component wall systems, while others tout the built-up. Which way do you go? Does it matter? Why? With a soothing breath, take a minute as you will soon discover why single component wall systems trump built-up systems and everything else will fall into place.
Posted: Mar 10, 2015
The Millennials Are Coming!
The USGBC’s LEED program, as well as other green building rating programs around the world, have without a doubt transformed the building construction industry. What started as a way to design, construct and operate buildings to be more energy efficient and environmentally responsible has changed over the past 20 years. Today’s version of LEED looks at the impact of the project site, energy efficiencies, water conservation, environmentally responsible materials and resources, and indoor quality.
Posted: Feb 10, 2015
DOE Research Looks At Taking Solar Power To The Next Level
Many of us attend webinars that tease us with an intriguing title. One that caught my eye recently was hosted by the Department of Energy. The title was “Highly Efficient Solar Thermochemical Reaction Systems”. It sounded like a highly technical topic that someone like Bill Nye the Science Guy would just love to hear.
Posted: Jan 27, 2015
Do You Really Need An Annual Roof Inspection? Absolutely!
Having your roof inspected is the single most important thing you can do to ensure its overall lifespan. Annually is better than never, but if you are in a location that experiences extreme weather conditions over different periods throughout the year (like most of us), the majority of roofing contractors suggest inspecting your roof at least twice a year, in the Fall and again in the Spring or early Summer. Since Spring will be here before we know it, it’s actually a good time to start thinking about this now.
Posted: Jan 20, 2015
Coil Coated Metal’s Specialized Coatings Differentiate Your Products
Today’s prepainted metals offer much more than just beautiful, flawless top coats. Coil coated metal’s specialized coatings differentiate your products from the competition. Specialized coatings include antimicrobial, non-skid, fingerprint resistant, reflective, anti-graffiti and anti-static coatings just to name a few. Whatever your product needs, the National Coil Coating Association and its members have the coating solution that will set you apart.
Posted: Jan 06, 2015
Health And Wellness Certification For Building Designs Are On The Horizon
Even though there is no letter “H” or “W” in the acronym for Leadership in Energy and Environmental Design (LEED) the USGBC’s green building rating system is creeping into the health and wellness of the building occupants. Lowering energy consumption and reducing the environmental footprints of buildings have been the primary focus of most of the major green building rating programs, including LEED and Green Globes…until now.
Posted: Dec 16, 2014
Institutional Knowledge and Employee Retention
Institutional knowledge is the knowledge of your business and industry contained within your company. It’s not easy for the accountants to measure, but as any good manager knows, it is one of the key assets of all successful businesses.
Posted: Dec 02, 2014
Will The Enernet Be The Future Of Electricity?
Just about everyone has seen the bulky inverter units on their cords used to charge laptop computers, smart phones, i-pads and numerous other small electronic devices. Even rooftop photovoltaic panels require inverters to change the DC power generated by the modules to AC for use inside the building. As the building construction industry moves closer to net zero energy designs, there is a growing need for buildings to generate their own electricity and to rely less on the traditional large utility grid.
Posted: Nov 11, 2014
USGBC Hints At Surprises Ahead During Greenbuild Remarks
Like every Greenbuild conference and expo ever held, this year’s event in New Orleans was filled with new and surprising information. One can get a sense of the hot topics just by looking at the titles of the more than 200 education sessions, and the speeches given at the opening and closing plenary. This year’s event was focused on the slow acceptance of LEEDv4 since its launch at Greenbuild 2013.
Posted: Oct 14, 2014
Oklahoma City Adopts Resilience Code
Autumn has arrived, the leaves are bursting into brilliant colors, and the nights are cool. It’s hard to believe that we are in the fourth quarter of 2014 already. It is often good to reflect on the events of the year. And the first three quarters of the year were packed full of events that disrupted the lives of many Americans. From wildfires in the Western states, to flash flooding in the Southwest, to a significant earthquake and aftershocks in California, hurricanes in the Atlantic and Pacific oceans, and wind and hail damage from thunderstorms just about everywhere in the summer.
Posted: Sep 09, 2014
Organizations Align To Simplify Green Building Regulations, Incentives
Big news in the sustainable building industry was the recent announcement of a partnership among five organizations that have been involved in codes, standards and rating programs related to green or sustainable building practice. The announced partnership among the US Green Building Council (USGBC), ASHRAE, International Code Council (ICC), AIA, and the Illuminating Engineering Society (IES) is being touted as a step toward harmonizing and simplifying the implementation of green building regulations and incentives. The intentions are well-founded, but the details of the interaction among the five groups are just now being disclosed.
Posted: Aug 05, 2014
Photovoltaics And Metal Roofing: A Marriage Getting Even Better
Metal Roofing is the ideal platform for rooftop photovoltaics (PV). The useful service life of typical PV units is often around 30 years before the output is below 80%. The useful service life of unpainted Galvalume® coated sheet standing seam roofing has been found to exceed 60 years based on a study by the Metal Construction Association and the ZAC organization. Service life of this type of roofing system is extended beyond 60 years in certain climate regions in the US.
Posted: Jul 29, 2014
No Going Back To Print: DesignandBuildwithMetal.com More Mobile Friendly
Everywhere I go, somebody is whipping out a tablet or smartphone to look up a product or an answer to some important, or not-so-important, fact. They’re being used literally every day by seemingly everyone . It’s undeniable that these devices have changed the way people live their lives personally and professionally, prompting me to reflect on how significantly electronic devices and media have become ingrained in the world’s culture during the last seven years since Bob Fittro, John Garvey and I launched DesignandBuildwithMetal.com in July 2007.
To see a complete list of columns and columnists, click here