Supplier Directory

Directory Home

Swenson Shear

Ceres
, CA
877-588-8748
Swenson Shear logo

Plant Location: Ceres, CA

Products & Services Offered:

SnapTable PRO

The all new SnapTable PRO adjusts to accommodate panels between 12” and 24” and is equipped to notch, slit, and hem up to 60” offsets for hip-valley roofing cuts. It is the newest addition to the SnapTable collection; added to increase the capability to slit and hem up to 60” for any commercial, industrial, or residential jobsite. The Snap Table PRO is an all-in-one panel preparation system for standing seam metal roofing - with the highest quality in notching, slitting, and hemming.

• Proudly designed and manufactured in the USA.

• Consistently notches, slits & hems standing seam profiles from 12”-24”.

• Saves an average of 35% labor cost.

• 2 Year Manufacturer’s Warranty.

• 60” slitting and hemming capabilities.

SnapTable Pro is ideal for: Light to 20-gauge metal including Cor-Ten 1", 1-1/2" Nail Strip, 1", 1-1/2", 1-3/4" SnapLock, 1", 1-1/2", 2" Mechanical Seam, Zip-Rib and many more options.

SnapTable HD

The Snap Table is an all-in-one panel preparation system for standing seam metal roofing - with the highest quality in notching, slitting, and hemming

• Consistently notches, slits & hems standing seam profiles from 12”-20”.

• Saves an average of 35% labor cost.

• 2 Year Manufacturer’s Warranty.

• 33" slitting and hemming capabilities.

• Proudly designed and manufactured in the USA.

SnapTable HD is ideal for: Light to 20-gauge metal including Cor-Ten 1", 1-1/2" Nail Strip, 1", 1-1/2", 1-3/4" SnapLock, 1", 1-1/2", 2" Mechanical Seam, Zip-Rib and many more options.

Original Shear Collection:

Heavy Duty Pivot Shear: Shearing straight at 90 degrees and up to an 8:12 gable, the custom blades match any panel profile, providing a clean cut, eliminating burred edges and flying metal. The Shear is jobsite transportable and weights 130 lbs.

The Hip/Valley Roofing Shear: The 64-inch blade and extended frame allows the shear to cut through 24-gauge panel straight at 90 degrees and up to a 9:12 valley with one single stroke. Custom blades match any profile, providing a clean cut and eliminating burred edges. The shear is jobsite transportable and weighs 200 lbs.

Soffit & Siding Shear: The premier tabletop shear ideal for cutting soffit, metal, shingles or siding. Jobsite transportable and weighs 65 lbs.

Stone-Coated Cutting Collection:

1 Arm Bandit Utility Cutter: Designed for use on a multitude of applications from stone-coated metal shake and shingle to 14-gauge stainless flat sheet. Equipped with a 34-inch blade that is made of long lasting, high carbon steel. This tool is safe, efficient, transportable and weighs just 65 lbs. Dual Edge Blade for double the cutting life.

The Base and Ridge bender: A combination tool used for bending stone-coated steel to control water from blowing into the roofing system. The ridge bender is used anywhere there’s a short course in the field, head wall, and ridge. The Base Bender bends stone-coated steel panels at the rakes, side walls, hips and valleys to control water from moving sideways into the roof.

Learn more about Swenson Shear at these Social Media sites:

Facebook

YouTube

Pinterest

Houzz

LinkedIn

GooglePlus

About Swenson Shear

Swenson Shear logoFor over 55 years Swenson Shear has manufactured innovative tools to ease the difficulty, improve the quality, and speed the process of metal panel preparation and installation. Swenson Shear has spent the last year revamping all product lines in order to continue to provide the highest quality metal panel preparation for concealed and exposed fastener panels, soffit and siding, and stone coated steel. For financing options, visit www.swensonshear.com/financing/. For all other information, visit www.swensonshear.com.

Swenson Shear's featured ad

swenson-shear-ad
Swenson Shear's featured brochure

swenson-shear-brochure
Swenson Shear's featured video

swenson-shear-video
^ Back To Top