Design Solutions

Solutions Home

Center For Advanced Medicine & Surgery

Petersen Aluminum
www.pac-clad.com
info@pac-clad.com

St. Joseph Mercy Health Center in Canton, MI has opened the Center For Advanced Medicine & Surgery. The 53,000 sq. ft. outpatient facility offers a variety of advanced services - some of which are normally found only at full-service hospitals.

Several Petersen profiles were selected to meet the design objectives for the $20 million project. Approximately 13,200 sq. ft. of 24 gauge, 18” Snap-Clad panels were utilized on the main portion of the roof in addition to 3,800 sq. ft. of 24 gauge, 16” Tite-Loc panels utilized to clad the barrel roof and entrance canopy. Approximately 2,800 sq. ft. of 12” Flush panels were used for soffit and trim applications. Plus, Petersen Composite Wall panels were used in fascia and column cover applications. All panels were finished in Hemlock Green.

Installation of the Petersen panels was done by Lutz Roofing Company, Shelby Township, MI. “The radius panels were long—60 feet. The challenge was getting them up to the roof,” said Jim Borgiel, project manager. “And, of course, we had a tight timeframe but we’re accustomed to that. The job turned out great.”

Design for the project was provided by HKS Architects, Farmington Hills, MI. The general contractor was George W. Auch Company, Pontiac, MI.

About Petersen

Petersen Aluminum logoPetersen, a Carlisle company, manufactures PAC-CLAD architectural metal cladding products in multiple gauges of steel and aluminum. PAC-CLAD products include standing seam roof panels, hidden- and exposed-fastener wall panels, flush- and reveal-joint panels, vented or solid soffit panels, perforated metal, coil and flat sheet, composite panels, column covers, plus fascia and coping. All are available in Kynar 70% PVDF finish in 45 standard colors that include a 30-year finish warranty. Most colors meet LEED and Energy Star requirements, and are rated by the Cool Roof Rating Council. Custom colors and weathertightness warranties are offered. Founded in 1965, Petersen’s facilities are located in Illinois, Georgia, Texas, Maryland, Arizona and Minnesota.

For information on the complete line of Petersen metal products, call 800-PAC-CLAD, visit www.pac-clad.com or write to info@pac-clad.com.


































^ Back To Top