petersen-skyscraper-september-2023

Beth Tfiloh Lower School

Dri-Design
www.dri-design.com
sales@dri-design.com

The Beth Tfiloh Lower School in Baltimore was moving from an attractive off-site location to the main campus and wanted its new building to be fun and inviting for the students.

Approximately 8,500 sq. ft. of Dri-Design panels finished in three complementary colors and installed in a checkerboard pattern helped to achieve the desired effect. The Dri-Design Wall Panel System is an economy-minded dry joint, pressure-equalized rainscreen system. In the case of the Beth Tfiloh school, the .080" aluminum panels were finished in Colonial Red, Burgundy and Mansard Brown colors.

“The challenge was that they had a pretty good looking facility at the off-campus location so we needed to make this new building as good or better,” said Michael Poness, AIA, design principal, WMCRP Architects, Landover, MD. “We wanted a high caliber of architectural design and function—so that led to looking at the materials pretty carefully.”

The project was WMCRP’s first experience with Dri-Design. “We hadn’t used it before but we were familiar with it. We liked the idea of the rainscreen approach and avoiding sealant joints which can be problematic. Dri-Design offers a good interlocking system,” Poness said.

The Dri-Design panels interface with masonry known as “Jerusalem stone,” according to Poness. “The masonry at the front is meant to recall the kind of materials used throughout the Middle East and particularly Israel. All of the children at the school will travel to Israel at one time so the intent was to have the architecture reflect what they will see there,” reports Poness.

The random design pattern of the three Dri-Design colors was determined by working on large elevation drawings. Installation of the panels was done by AWP, Inc., Baltimore.

According to Poness, the director of the school said, “The best way to describe this new building is ‘wow’.”

The general contractor on the project was H.H. Lewis Contractors, Owings Mills, MD.

Dri-Design panels can be made from a variety of materials including painted aluminum, zinc, copper and stainless steel and are 100% recyclable. Panels are available in any Kynar color in both standard and custom sizes.

About Dri-Design

DriDesign_logo_020511Dri-Design was founded in 1995 to "solve significant problems with traditional metal panel systems—delamination, staining because of the effects of weather on joints and gaskets, a lack of color and texture options, the rising cost of production and inefficient installation practices." Panels of the Dri-Design® Wall Panel System can be installed over commercial-grade Tyvek onto plywood, or they can be used with outboard insulation pressure-equalized rainscreen systems. The 100% recyclable panels can be manufactured from a variety of materials, including zinc, copper, stainless steel, and painted and anodized aluminum. Panels are available in any fluoropolymer paint color and are sized and detailed to meet the specific requirements of each project. Unique profiles include: Shadow, Tapered, Perforated, Embossed, Textured, Imaging Technology and Inspire. These options create angles, textures, depth, images and performance that cannot be matched. The Dri-Design® Wall Panel System is Dade County and AAMA 508-07 approved.

To learn more about the company's products, visit www.dri-design.com.

facebook40    instagram40    linkedin40
^ Back To Top