bpd-skyscraper-december-2024
roof-hugger-skyscraper-december-2024

Design Solutions

Solutions Home

Bitterman Residence

Petersen Aluminum
www.pac-clad.com
info@pac-clad.com

After the original shake shingles sustained significant storm damage, the owner of an upscale residence in Orlando, FL wanted a new metal roof installed that would be “the last roof we put on this house.” Approximately 12,000 sq. ft. of Petersen SNAP-CLAD panels were installed to meet the owner’s objective.

The SNAP-CLAD system has been designed for architectural aesthetics and structural performance and meets Florida’s Building Code and Miami-Dade NOA standards for wind-uplift resistance.

The 16” wide, 24 gauge galvanized steel panels were finished in Copper Penny. Approximately 4,000 sq. ft. of PAC-CLAD flat stock was used for flashings and gutters on the project.

Installation of the Petersen panels was done by RAE CO of Ocala, Ocala, FL.

About Petersen

Petersen Aluminum logoPetersen, a Carlisle company, manufactures PAC-CLAD architectural metal cladding systems in multiple gauges of steel and aluminum. PAC-CLAD products include wall panel systems, standing seam roof panel systems, vented and solid soffit panels, perforated metal, coil and flat sheet, composite panels, column covers, plus fascia and coping. All are available in a Kynar-based 70% PVDF Fluropon coating in 50 standard colors plus simulated finishes that include a 35-year finish warranty. Most colors meet LEED requirements and are rated by the Cool Roof Rating Council. Custom colors and weathertightness warranties are offered. BIM and CAD documents are available for most products. Founded in 1965, Petersen’s facilities are located in Illinois, Georgia, Texas, Maryland, Arizona and Washington. For information on the complete line of Petersen’s PAC-CLAD metal products, call 800-PAC-CLAD, visit www.pac-clad.com or write to info@pac-clad.com.

facebook40   twitter40    linkedin40    youtube40

^ Back To Top