Design Solutions

Solutions Home

Coxe Cage

Petersen Aluminum

The venerable Coxe Cage field house at Yale University in New Haven, Conn. remains an integral part of the school’s track and field history thanks to the building’s new metal roof supplied by Petersen Aluminum. Although the old cinder track and dirt floor were replaced with modern surfaces in 1982, the roof and its large, single-glazed skylight – both of which had deteriorated badly and needed replacing – had remained largely untouched for 80 years, until late 2013.

Built in 1928, the Cage was named for Charles Edmund Coxe, a hammer thrower on Yale’s squad. The story goes that Coxe, who was charged with raising funds for the new facility, offered the necessary $300,000 with the stipulation that it be named for him. Construction began on what then was considered one of the largest structures of its kind in the world. Measuring more than 350 feet long and 156 feet across with a ceiling reaching nearly 83 feet high, the building encloses more than 3.3 million cubic feet of air space.

The University hired Kiss + Cathcart Architects in Brooklyn, N.Y., to lead an evaluation of the technical feasibility, energy performance, aesthetics and cost of various envelope and mechanical upgrades and replacements. After review of the options and alternatives, it was determined that the first phase of renovation would concentrate on the roof and skylight.

Approximately 26,000 sq. ft. of Petersen Aluminum .040 aluminum Tite-Loc Plus panels were used on the project. The 16-in. panels were finished in PAC-CLAD Cool Color Zinc.

“This was a fairly complex roof,” said architect Colin Cathcart. “It included a ridge ventilator unit, giant vent fans and, of course, the massive skylight. The roof has enormous scale compared to most roof installations.”

The design team initially considered other roofing materials but settled on metal because of the life span, low maintenance and the look. “The view of the building and roof from the adjoining Yale Bowl was an important consideration,” Cathcart said. “We felt the standing seam panels interfaced nicely with the new skylight to retain the historical appearance. The metal matched up functionally and aesthetically with the performance of the skylight and the flashings, gutters and parapets.”

The Petersen roof was installed by Silktown Roofing, Manchester, Conn. The majority of the Tite-Loc Plus panels were 72-ft. long. “Getting those long panels up on the roof by crane and landing them on a 7:12 slope was a real challenge,” said Steve Pumphrey, project manager. “The old roof was removed down to the existing tongue-and-groove decking. Then we stitched all of the decking boards with fasteners, installed an ice and water shield, then nailboard, and then another ice and water shield. But the toughest part was getting the long panels up there. Once that occurred, the job was relatively straightforward. Everybody loves it.”

Cathcart reiterated the challenges of the job. “It was an amazing logistical accomplishment necessitated by the scale of the roof,” He said. “Matching up all of the systems was really the primary design challenge. The overall installation went cleanly.”

The Petersen distributor was ABC Supply, Hartford, Conn. The general contractor on the project was Giordano Construction Co., Branford, Conn. The skylight was provided by E-Skylight Inc., Branford, Conn.

About Petersen

Petersen Aluminum logoPetersen, a Carlisle company, manufactures PAC-CLAD architectural metal cladding systems in multiple gauges of steel and aluminum. PAC-CLAD products include hidden- and exposed-fastener wall panels, standing seam roof panels, flush- and reveal-joint wall panels, vented or solid soffit panels, perforated metal, coil and flat sheet, composite panels, column covers, plus fascia and coping. All are available in a Kynar-based 70% PVDF Fluropon coating in 46 standard colors and 16 wood grain finishes that include a 35-year finish warranty. Most colors meet LEED requirements and are rated by the Cool Roof Rating Council. Custom colors and weathertightness warranties are offered. BIM and CAD documents are available for most products. Founded in 1965, Petersen’s facilities are located in Illinois, Georgia, Texas, Maryland, Arizona and Washington. For information on the complete line of Petersen’s PAC-CLAD metal products, call 800-PAC-CLAD, visit or write to

facebook40   twitter40    linkedin40    youtube40

^ Back To Top