Design Solutions

Solutions Home

Eblen Intermediate School

Petersen Aluminum

Buncombe County Schools in Asheville, NC sought to relieve overcrowding in eight existing schools with the simultaneous construction of two new intermediate (grades 5-6) schools. The twin 107,000 sq. ft. facilities are identical in design and offer students a unique sense of discovery. Eblen Intermediate School utilizes a colorful variety of PAC-CLAD profiles from Petersen.

Sustainability was a driving directive for the design of the schools provided by Architectural Design Studio (ADS), Asheville, NC. The project is slated for LEED Silver status.

Eblen Intermediate School’s roofing includes: 14,000 sq. ft. of Tite-Loc Plus 24 gauge steel panels in Bone White, Champagne, Colonial Red and Arcadia Green; 6,000 sq. ft. of 24 gauge 7.2 Panels in Bone White, Sierra Tan and Terra Cotta; 4,000 sq. ft. of 24 gauge M-36 Panels in Champagne; 3,000 sq. ft. of 24 gauge 2.67” x 7/8” Corrugated Panels in Colonial Red; and 8,000 sq. ft. of.032” aluminum PAC 850 Soffit Panels in Bone White.

“Metal was the natural choice to use on the roof of the buildings,” according to ADS principal Mike Cox. “School construction has been my primary focus for many years and my emphasis has always been durability.  Metal gives us more durability and longer life than other materials.”

Site limitations caused some challenges with daylighting, according to Cox. “Daylighting was one of the features we really wanted to get into the buildings,” he said. Both buildings are oriented east/west. ADS’ solution was to design construction of large vertical skylights, called “monitors”, for each classroom. “The monitors are designed to get daylight in the classrooms year-round but to completely avoid the entry of direct sunlight. It’s all reflected light - any day, any time, any time of year - there’s no direct sunlight.”

Installation of the PAC-CLAD material, supplied by PAC distributor Commercial Roofing Specialties, Inc., College Park, GA, was done by Peach State Roofing, Lawrenceville, GA. “It was a challenging job due to the complex design and the phasing and coordination with the various trades,” said David Schmitt, vice president. “The monitor skylights were built with metal stud framing and clad with the Petersen material. The trim packages all required individual measurements.  But the end product really turned out great.”

A sense of discovery is fostered in the design of the schools with educational detailing including a representation of the planets, the Pythagorean Theorem at a very large scale, a sun dial on the south wall and a collector that clearly indicates the arrival of the equinox in March and September in the interior of the school.

Completion of the schools fulfills a Buncombe County Board of Education commitment to student health, energy efficiency and state-of-the-art technology to raise the bar for future county education facilities. The buildings will use 30% less energy than a typical school.

About Petersen

Petersen Aluminum logoPetersen, a Carlisle company, manufactures PAC-CLAD architectural metal cladding systems in multiple gauges of steel and aluminum. PAC-CLAD products include hidden- and exposed-fastener wall panels, standing seam roof panels, flush- and reveal-joint wall panels, vented or solid soffit panels, perforated metal, coil and flat sheet, composite panels, column covers, plus fascia and coping. All are available in a Kynar-based 70% PVDF Fluropon coating in 46 standard colors and 16 wood grain finishes that include a 30-year finish warranty. Most colors meet LEED requirements and are rated by the Cool Roof Rating Council. Custom colors and weathertightness warranties are offered. BIM and CAD documents are available for most products. Founded in 1965, Petersen’s facilities are located in Illinois, Georgia, Texas, Maryland, Arizona, Washington and Minnesota. For information on the complete line of Petersen’s PAC-CLAD metal products, call 800-PAC-CLAD, visit or write to

facebook40   twitter40    linkedin40    youtube40

^ Back To Top