Design Solutions

Solutions Home

Sheboygan Residence

Petersen Aluminum
www.pac-clad.com
info@pac-clad.com

When a slate roof on an impressive residence in Sheboygan, Wis., failed after only six years, it was Petersen’s Redi-Roof panels that came to the rescue. “We removed 72 tons of slate,” said installer Steve Billmann, president of Architectural Roofing & Sheet Metal in Sheboygan. “The slate was swelling and pulled itself right out of the nails. We started taking off just a small area but ended up removing the entire roof.”

Approximately 14,000 sq. ft. of Petersen’s PAC-CLAD Redi-Roof panels were installed. The 24 gauge panels were finished in Dark Bronze and fabricated at Petersen’s headquarters plant in Elk Grove Village, Ill. “Redi-Roof has been in the Petersen line for a long time and contractors like it because it’s easy to install,” said Chris Donegan, Petersen’s Wisconsin/Michigan sales rep. “The offset profile presents a nice look and can help alleviate potential oil canning, particularly on 18-in. panels depending on color and pitch.”

The owners of the residence initially wanted to replace the slate with a metal shingled roof, Billmann said. “But I convinced them to go with the Redi-Roof. I told them ‘I’ve been putting Petersen on for 30-plus years and it’s the only way to go.’ After we got done, the owner thanked me for talking them into it. Petersen is all I ever use.”

The roof design was somewhat complex but presented no major challenges to Billmann and his crew. “We do a lot of custom work,” Billmann said. The gutters were fabricated from PAC-CLAD flat sheets.

The Petersen distributor on the project was Milwaukee Insulation in Butler, Wis.

Photos © scottbellphotography.com

About Petersen

Petersen Aluminum logoPetersen, a Carlisle company, manufactures PAC-CLAD architectural metal cladding products in multiple gauges of steel and aluminum. PAC-CLAD products include standing seam roof panels, hidden- and exposed-fastener wall panels, flush- and reveal-joint panels, vented or solid soffit panels, perforated metal, coil and flat sheet, composite panels, column covers, plus fascia and coping. All are available in Kynar 70% PVDF finish in 45 standard colors that include a 30-year finish warranty. Most colors meet LEED and Energy Star requirements, and are rated by the Cool Roof Rating Council. Custom colors and weathertightness warranties are offered. Founded in 1965, Petersen’s facilities are located in Illinois, Georgia, Texas, Maryland, Arizona and Minnesota.

For information on the complete line of Petersen metal products, call 800-PAC-CLAD, visit www.pac-clad.com or write to info@pac-clad.com.

facebook40   twitter40   youtube40

^ Back To Top