bpd-skyscraper-december-2024
roof-hugger-skyscraper-december-2024

Georgia Sailplane Hangar

Schweiss Doors
www.schweissdoors.com
schweiss@schweissdoors.com

Steve Vihlen earned his pilot's license at an early age and joined the Air Force. After spending eight years as an F-16 combat pilot, he left the service and began a 30-year career with FedEx. His job would seem exciting--piloting a 767 cargo plane to destinations spanning the globe--but Vihlen's passion is sailplanes. He owns two, in addition to other private craft, which he stores in a hangar adjacent to his house. To keep his prized possessions safe and secure, the hangar is outfitted with liftstrap bifold door from Schweiss Doors

Vihlen's 70' x 70' hangar is next to the runway at the Mallards Landing Airpark in Locust Grove, GA. The four-plane hangar was erected by Watford Steel Buildings of Adel, GA, and features a Schweiss Doors 60' x 12' Schweiss door with a manual side-latch system and exterior sheet metal cladding. The interior of the hangar is insulated with 4"-thick, white-faced insulation and contains a 15' x 32' mancave that connects to an outside bar; guest quarters with a living room; and a bathroom, shower and kitchenette.

“The hangar is wonderful,” Vihlen says. “We poured the foundation within a week of when we poured the foundation for our own house. When we lived in Memphis, I rented a hangar at a nearby public-use grass airstrip. We built this hangar because we wanted our own hangar near our home.”

Vihlen owns a 1964 American-made Schweizer 126-B glider with a 59-foot wingspan, and a German-made Alexander Schleicher ASG-29 single-place racing glider that he bought new from the factory in 2006. The ASG-29 has a wingspan over 113 feet! He also flies a 7AC Aeronca Champ and uses his vintage 1952 Cessna L-19/0-1 to tow the gliders. The L-19 is in its original colors and was Air Force from 1952-1973. Civil Air Patrol used it until is was civilianized in 1978.

The Schweiss bifold liftstrap door was hung by Premier Building Systems of Lawrenceville, GA. Vihlen finished the installation by putting in the motors, liftstraps and autolatches all by himself.

 “I first learned about Schweiss Doors through fellow FedEx pilot friends that had their own hangar at an airpark in Memphis,” Vihlen says. “It was an old cable version bifold door. I got a lot of information and advice from them when I was putting plans together to build our hangar. I started looking about 10 years ago and checked with another hangar door manufacturer. Schweiss seemed so much more developed and evolved and it seemed like Schweiss was well established. I felt more comfortable knowing Schweiss would back up their product better.”

Vihlen went with a bifold door over a hydraulic door because he was more familiar with bifolds and always liked the look of the bifold door better. He also liked the fact that he could park closer to the outside of the door.

“The Schweiss door is easy to install, as long as you follow the instructions,” Vihlen says. “It’s not complicated and it’s easy to maintain. It met my expectations and I haven’t had any difficulty with it. My glider club in Arkansas had the non-powered accordion doors on its hangar. They scared me a lot because of the pinching hazard. I really don’t have any experience with the hydraulic door.”

About Schweiss Doors

Schweiss-logoSchweiss Doors is the premier manufacturer of hydraulic and bifold liftstrap doors. Doors are custom made to any size for any type of new or existing building for architects and builders determined to do amazing things with their buildings, including the doors. Schweiss also offers a cable to liftstrap conversion package. To learn more, visit www.bifold.com or www.schweisshydraulicdoors.com.

And to learn about Schweiss' new Build Your Own Door Kit, which gives customers the plans and essential components to build their own Schweiss Doors, visit  www.bifold.com/build-your-own-door.php.

facebook40    twitter40    pinterest40    instagram40    linkedin40    youtube40



^ Back To Top