bpd-skyscraper-december-2024
roof-hugger-skyscraper-december-2024

Millennium High School Renovation

Petersen Aluminum
www.pac-clad.com
info@pac-clad.com

High school construction and renovation projects in rapidly expanding communities often are undertaken with a strong sense of civic pride, to emphasize a city’s new importance. This was the motivation leaders with the Agua Fria Union School District in Goodyear, Ariz., had when they described their goals for a new gymnasium, built in tandem with a significant renovation, for the 1,965-student Millennium High School. Their stated goal was to make the facility the most sought-after in the state, a goal they just might have achieved. The structure’s forward-looking design begins with its exterior, where PAC-CLAD metal wall panels from Petersen are arranged in a complex pattern that helps break up the mass of the 45,000-sq.-ft. structure and sets it apart from the typical high school gym.

To say the Phoenix suburb of Goodyear has had a growth spurt in the past decade or so is an understatement – its population expanded by 46% between the 2010 and 2020 censuses, up to more than 95,000 in 2020, from just more than 65,000 ten years earlier. Of course, with all those new residents comes a need for new and expanded schools, which drove the Millennium High School renovation. The new multi-purpose facility, dubbed the Rise and Roar Center (the school’s mascot is a tiger), is the centerpiece of the effort. With seating for approximately 2,400, the center features three regulation basketball courts, tunnels to both locker rooms, a new weight room, boys and girls team rooms and a Diamond Vision display.

“Standing over 40 ft. tall at its highest point, the highest volume – the courts – features a sloped roof reflective of the surrounding desert mountains,” said Christina Noble, AIA, senior project designer with the Phoenix office of BWS Architects, which designed the gymnasium, describing its impressive interior. “Deep overhangs protect clerestory glazing that bring mountain views to the building interior.”

For the exterior façades, designers wanted to use metal wall panels to create the abstracted representation of tiger stripes, topped by the school teams’ signature purple to emphasize the building’s interior volume. Clever planning helped minimize the seeming intricacy of translating the striped patterning to the installers, according to Jesse Ross, AIA, BWS’s project architect on the job.

“While our pattern appears complex, we were able to keep to a standard panel size and connections, leading to few-to-no custom details,” he said, adding that he was pleased with the finished appearance. “There’s always the fear that what you put on paper may not translate into reality, but the pattern turned out just as we had hoped.”

The striping design isn’t as random as it looks, which also aided installation, according to Mike Villa, project manager with Phoenix-based installer Progressive Roofing. “We laid it out like an individual puzzle section – we created a pattern in a 20-by-20 module,” he said. “It becomes really hard to see that it really is a pattern.”

The work has paid off in community appreciation for the new facility, which has hosted several national tournaments since its completion in February 2022. And those who worked on the job have their own sense of pride from a job well done.

“I’m really pleased with the outcome,” Villa said. “There’s been a lot of good talk about how we were able to get the blending of the joints. Overall, this turned out better than a lot of other projects that aren’t as complicated.”

Photography: alanblakely.com

About Petersen

Petersen Aluminum logoPetersen, a Carlisle company, manufactures PAC-CLAD architectural metal cladding systems in multiple gauges of steel and aluminum. PAC-CLAD products include wall panel systems, standing seam roof panel systems, vented and solid soffit panels, perforated metal, coil and flat sheet, composite panels, column covers, plus fascia and coping. All are available in a Kynar-based 70% PVDF Fluropon coating in 50 standard colors plus simulated finishes that include a 35-year finish warranty. Most colors meet LEED requirements and are rated by the Cool Roof Rating Council. Custom colors and weathertightness warranties are offered. BIM and CAD documents are available for most products. Founded in 1965, Petersen’s facilities are located in Illinois, Georgia, Texas, Maryland, Arizona and Washington. For information on the complete line of Petersen’s PAC-CLAD metal products, call 800-PAC-CLAD, visit www.pac-clad.com or write to info@pac-clad.com.

facebook40   twitter40    linkedin40    youtube40

^ Back To Top