Center For Advanced Medicine & Surgery

Petersen Aluminum

St. Joseph Mercy Health Center in Canton, MI has opened the Center For Advanced Medicine & Surgery. The 53,000 sq. ft. outpatient facility offers a variety of advanced services - some of which are normally found only at full-service hospitals.

Several Petersen profiles were selected to meet the design objectives for the $20 million project. Approximately 13,200 sq. ft. of 24 gauge, 18” Snap-Clad panels were utilized on the main portion of the roof in addition to 3,800 sq. ft. of 24 gauge, 16” Tite-Loc panels utilized to clad the barrel roof and entrance canopy. Approximately 2,800 sq. ft. of 12” Flush panels were used for soffit and trim applications. Plus, Petersen Composite Wall panels were used in fascia and column cover applications. All panels were finished in Hemlock Green.

Installation of the Petersen panels was done by Lutz Roofing Company, Shelby Township, MI. “The radius panels were long—60 feet. The challenge was getting them up to the roof,” said Jim Borgiel, project manager. “And, of course, we had a tight timeframe but we’re accustomed to that. The job turned out great.”

Design for the project was provided by HKS Architects, Farmington Hills, MI. The general contractor was George W. Auch Company, Pontiac, MI.

About Petersen

Petersen Aluminum logoPetersen, a Carlisle company, manufactures PAC-CLAD architectural metal cladding systems in multiple gauges of steel and aluminum. PAC-CLAD products include hidden- and exposed-fastener wall panels, standing seam roof panels, flush- and reveal-joint wall panels, vented or solid soffit panels, perforated metal, coil and flat sheet, composite panels, column covers, plus fascia and coping. All are available in a Kynar-based 70% PVDF Fluropon coating in 46 standard colors and 16 wood grain finishes that include a 30-year finish warranty. Most colors meet LEED requirements and are rated by the Cool Roof Rating Council. Custom colors and weathertightness warranties are offered. BIM and CAD documents are available for most products. Founded in 1965, Petersen’s facilities are located in Illinois, Georgia, Texas, Maryland, Arizona, Washington and Minnesota. For information on the complete line of Petersen’s PAC-CLAD metal products, call 800-PAC-CLAD, visit or write to

facebook40   twitter40    linkedin40    youtube40

^ Back To Top