Eloy City Hall

Petersen Aluminum

For decades, citizens of Eloy, Ariz., often had to make multiple trips to conduct their regular business with the city. Space limitations meant city offices were located in different facilities. So, getting a building permit could mean a trip to the Planning and Zoning office, followed by a drive across town to pay permit fees at the Finance Department. A new $7 million city hall has placed all departments together under one roof, with an architectural design inspired by the local history and environment.

Located halfway between Phoenix and Tucson, Eloy’s history is tied to that of the Southern Pacific Railroad. That company built the first railroad line across southern Arizona in the late 1870s, which was called the East Line of Yuma. A siding and section house were added in 1902 and named Eloy – an acronym formed by the line’s abbreviation. Since then, the town’s permanent population has grown to approximately 11,000, but it’s growing fast. That number is expected to almost double by 2025, and more efficient city operations will be critical to manage coming development.

Designers with SmithGroup’s Phoenix office drew on the surrounding desert’s muted color palette, along with the town’s strong railroad history, in their plans for the new city hall. The sand-toned, cast-concrete walls feature panels segmented by vertical I-beams as a railroad-track reference. A curving, EIFS-based wall element adds a pop of muted color, in a hue that seems a close match to that of the saguaro cactus native to the region.

“That was one of the influences – they really like the cactus – along with their agricultural history,” said Stacia Ledesma, a SmithGroup designer on the project. A similar Aged Copper finish was chosen for the two entry canopies fabricated from perforated .050-gauge aluminum PAC-CLAD 7.2 panels from Petersen. These canopies serve dual functions, according to Ledesma.

“We really wanted to bring shading into the building, and the west canopy also creates a gathering space as well as an entry,” she said, adding that the west canopy also appears to continue into the building, creating a signature ceiling element. “It really brings that texture and layering into the building – It blends the interior and exterior space.”

LED lighting is incorporated into these perforated panels, to add even more visual interest after the sun goes down. “It’s very subtle, and it actually blends in really well with the profiled panels,” Ledesma said.

Given how nicely the canopies’ finish blends with the EIFS wall element, it might be surprising to learn it was the design team’s second choice. “We initially were going with Corten metal, but we couldn’t afford that,” Ledesma said, adding that her familiarity with Petersen’s PAC-CLAD architectural metal lineup gave her confidence the backup plan would be successful.

“I knew the PAC-CLAD finish wouldn’t rust,” she said. “And the Aged Copper worked as well, so it was really about the color.”

Installers with Tucson-based Progressive Roofing had a couple of challenges getting the panels into place. As project manager Bill Quinney explained, the panels were installed on the underside of the canopies’ framing structures, instead of on top, as is usually the case. This meant the panels had to be held up, from underneath, as they were screwed into place. “The screw placement had to be precise, because you would be able to see all the screw heads.

The panels’ perforations complicated this effort, Quinney said. “Because the panels are perforated, they’re less rigid, so there was a higher risk of them being damaged as the guys were holding them up.”

Fortunately, according to Ledesma, the extra attention has paid off in the end. “I think everybody’s pleased with the results,” she said. “And they’re proud of their new building.”


About Petersen

Petersen Aluminum logoPetersen, a Carlisle company, manufactures PAC-CLAD architectural metal cladding systems in multiple gauges of steel and aluminum. PAC-CLAD products include hidden- and exposed-fastener wall panels, standing seam roof panels, flush- and reveal-joint wall panels, vented or solid soffit panels, perforated metal, coil and flat sheet, composite panels, column covers, plus fascia and coping. All are available in a Kynar-based 70% PVDF Fluropon coating in 46 standard colors and 16 wood grain finishes that include a 35-year finish warranty. Most colors meet LEED requirements and are rated by the Cool Roof Rating Council. Custom colors and weathertightness warranties are offered. BIM and CAD documents are available for most products. Founded in 1965, Petersen’s facilities are located in Illinois, Georgia, Texas, Maryland, Arizona and Washington. For information on the complete line of Petersen’s PAC-CLAD metal products, call 800-PAC-CLAD, visit or write to

facebook40   twitter40    linkedin40    youtube40

^ Back To Top