Design Solutions

Solutions Home

Kimbrough Animal Hospital

Petersen Aluminum

The new Kimbrough Animal Hospital in Longview, Texas, was born of tragedy. An overnight fire in the hospital’s previous building destroyed that structure and killed 39 animals sleeping in the hospital’s kennel area. In the plans to rebuild, the owner, Dr. Kenneth Kimbrough, certainly wanted the highest level of fire protection. He also wanted a design that somehow reflected both the area’s agricultural heritage and the journey he’d taken to create a new facility from the ashes of the old. Metal roof and wall panels helped with both of these goals.

“Number one, because of the tragedy, Dr. Kimbrough wanted to establish a facility that went above and beyond the requirements for a veterinary facility,” said Ron Mabry, whose firm Ron Mabry Architects in Tyler, Texas, was tapped for the new building’s design. In addition to sprinklers throughout the building, this meant non-combustible construction in the kennel area and four entrances to that area for easier access in any future emergency.

When it came to aesthetics, though, Kimbrough wanted an exterior that looked far friendlier than concrete block would allow. This brought architect Mabry to the idea of a barn.

“When we started designing the building, we looked at what people relate to, regarding animals – that was the primary emphasis on the form,” Mabry said, adding that metal panels were a natural choice, both for the roof and exterior walls. “Number one, for their durability and, again, they relate to an agricultural facility.”

Even with the rural look, Mabry wanted to create a streamlined appearance to underscore the professionalism current and future patients would encounter during their visits to the new facility. Petersen’s PAC-CLAD line of wall and roof panels offered just what the architect wanted, in this regard.

“We chose PAC-CLAD for this project because we wanted the clean lines of the concealed fasteners,” he said. “And they had good details for how the panels marry together.”

In all, the façade uses a mix of 5,250 sq. ft. of 0.24-gauge Flush wall panels in Slate Gray, Teal and Berkshire Blue, plus 4,400 sq. ft. of 0.24-gauge Precision Series HWP panels in Slate Gray. For the roof, Mabry specified 18,000 sq. ft. of 0.24-gauge Snap-Clad panels in Charcoal.

These varied colors help define the facility’s interior spaces from the outside. The interior incorporates two different functions – a traditional veterinary practice and an attached grooming and kennel business. Mabry wanted this differentiation to be clear from the street and parking area.

“With the building envelope, you can read the volumes of the spaces inside, so you know what to expect,” Mabry said.

Mabry was especially pleased that Petersen’s broad palette of finishes was able to meet his early vision of a bright and cheery facility – especially in the wake of the tragic fire.

“We wanted bright colors, a positive, fun approach – something that would really catch views from the street,” he said. “When we did the renderings, we had rendered with these colors, and the owner really liked it. Petersen had the palette to nail it.”

The installer on the project was Curtis-McKinley Roofing & Sheet Metal, based in Longview, Texas.

Keeping the variously finished panels organized posed a bit of a challenge, said Anthony McKinley, operations vice president with installer Curtis-McKinley Roofing in Longview, Texas. But a larger chore was getting the panels into place, given the project’s tight jobsite.

“The majority of the panels were 40 ft. long, and some were a little longer, and there wasn’t enough room to turn them around,” he said. This meant his team had to call in a crane to get the panels positioned. However, he added, any other questions regarding the panels themselves, and their detailing, were quickly addressed by Petersen’s professional staff.

“If we had any technical questions, Petersen was there to help,” he said. “We’ve been using their material for a very long time and have a great long-term relationship with them.”


About Petersen

Petersen Aluminum logoPetersen, a Carlisle company, manufactures PAC-CLAD architectural metal cladding systems in multiple gauges of steel and aluminum. PAC-CLAD products include hidden- and exposed-fastener wall panels, standing seam roof panels, flush- and reveal-joint wall panels, vented or solid soffit panels, perforated metal, coil and flat sheet, composite panels, column covers, plus fascia and coping. All are available in a Kynar-based 70% PVDF Fluropon coating in 46 standard colors and 16 wood grain finishes that include a 30-year finish warranty. Most colors meet LEED requirements and are rated by the Cool Roof Rating Council. Custom colors and weathertightness warranties are offered. BIM and CAD documents are available for most products. Founded in 1965, Petersen’s facilities are located in Illinois, Georgia, Texas, Maryland, Arizona, Washington and Minnesota. For information on the complete line of Petersen’s PAC-CLAD metal products, call 800-PAC-CLAD, visit or write to

facebook40   twitter40    linkedin40    youtube40

^ Back To Top