roof-hugger-skyscraper-december-2024
bpd-skyscraper-december-2024

Featured Projects

Projects Home

Apogee Stadium

UNT’S LEED-Platinum Stadium Clad With Recyclable Alucobond® ACM

The University of North Texas’ (UNT) Apogee Stadium – the first newly constructed collegiate football stadium in the nation to earn LEED Platinum certification – opened in Denton, Texas, in September 2011 as the new home of Mean Green football.

To earn this elite certification from the U.S. Green Building Council, architects at Dallas-based HKS, Inc., incorporated any number of ecologically friendly design elements in UNT’s $78-million 30,850-seat stadium, including selecting renewable and recycled construction materials, reducing energy and water consumption, and reducing CO2 emissions through the incorporation of three wind turbines to generate power.

While environmentally conscious, the collegiate stadium – which was built on 46 acres and is uniquely designed as a horseshoe-shaped bowl – also features several high-end elements, including: two state-of-the-art video boards, 21 luxury suites, 750 club-level seats, a high-tech press facility, banquet rooms and a team apparel store.

“The athletic department and university facilities group wanted something contextual but that would push the limits of what they could get for the money,” said Jim Herckt, AIA, LEED AP BD+C, project architect at HKS.

HKS turned to the Dallas office of Manhattan Construction Co. to serve as general contractor for UNT’s Apogee Stadium. (The two companies previously had worked on design and construction of the new Dallas Cowboys Stadium, which opened in 2009 in Arlington, Texas.) This project took a very collaborative team approach throughout the design and construction process in order to meet UNT’s 50-year facility requirement for the new stadium, according to Herckt.

“We focused on building things that matter the most in the beginning because you can always embellish them later,” said Herckt. “We focused on utilizing local materials and green materials – the right materials – from the beginning. We wanted to make it simple.”

To create a cohesive look with other campus buildings, brick was utilized to construct stadium walls.

Recyclable Alucobond® (www.AlucobondUSA.com) aluminum composite material (ACM) by 3A Composites USA was installed as a unifying design element throughout the stadium. A total of 49,754 square feet of Alucobond in the 4mm thickness was installed in two colors on the UNT stadium, including: 48,320 square feet of the Sunrise Silver Metallic color and 1,334 square feet of custom Mean Green.

(Alucobond consists of two sheets of 0.020” aluminum thermobonded to a plastic core. Alucobond provides extraordinary flatness and rigidity, excellent formability, low weight and outstanding weather resistance. Alucobond aluminum-faced panels are manufactured with a polyethylene core in a standard 4mm thickness.)

Alucobond in the Sunrise Silver Metallic color is installed as cladding on the press box, suites and club exteriors and as fascia beneath canopies. Alucobond in the custom Mean Green color is installed as a design accent in areas such as ticketing booths and behind the 15-foot by 27-foot north end zone video scoreboard.

3A Composites USA is well-known for its color-matching capabilities; and, the ability to color match the custom Mean Green (one of the university’s official colors) was an important factor in the selection of Alucobond as stadium cladding, according to Herckt.

“We worked with Alucobond marketing personnel upfront to get several color samples,” said Matthew Le, head of project management at NOW Specialties, Inc., of Carrollton, Texas, which fabricated and installed the Alucobond panels with the NOW 1100 route and return wet-seal system. “Alucobond offers exceptional customer service as well as outstanding finish warranties.”

Le said NOW Specialties was challenged to fabricate Alucobond panels in a cantilever design for the stadium’s upper-level club area and then install those panels above tiers of flat metal-bench bleacher seating.

“We came up with a unique scaffolding system that helped to spread the load and allowed us to reach the club-level panel and canopy areas,” said Le. “Once installed, our metal panel system looked outstanding. We’ve received many compliments on this project.”

Herckt said HKS worked with Manhattan Construction Co. and its subcontractors, including NOW Specialties, early in the design of the Apogee Stadium in order to create “a common understanding of the design intent and to leverage the collective knowledge of the team to create a very efficient design solution.” This cooperative approach helped to generate significant cost savings in the design and construction of the $78-million Apogee Stadium, according to Herckt, who said other sports stadiums featuring similar amenities have cost “upwards of $100 million.”

“We were able to give the university the best bang for the buck and produce real-world savings,” according to Herckt, who said the UNT stadium project’s original intent was to meet LEED Silver certification guidelines.

“The fact that it achieved LEED Platinum is an indication of how well this team worked together,” said Herckt. “One thing we learned is that it doesn’t take a lot of money to build a sustainable building. You just need to pay attention, go through all of the details, and have a good team.”

Photos by Daryl Shields – HKS, Inc.

About ALUCOBOND, Manufactured by 3A Composites USA

Alucobond logoALUCOBOND has been a pioneer in metal façades for over 50 years. As a material of choice for exterior and interior design, ALUCOBOND provides a seamless transition of color from indoor to outdoor spaces. ALUCOBOND products are chosen for outstanding attributes such as flatness, formability, durability, and ease of fabrication. Made in the USA, ALUCOBOND is manufactured in a range of sizes and trend-forward colors and finishes, both Standard and Non-Standard. Furthermore, an array of options lend to creating inspiring architectural concepts and bring brand designs to life. For more information about ALUCOBOND PLUS, ALUCOBOND AXCENT, and ALUCOBOND EasyFix and ALUCOBOND FaceFastened, call 1-800-626-3365, email info.usa@3AComposites.com or visit www.alucobondUSA.com.

facebook40  pinterest40  linkedin40  instagram40  youtube40

^ Back To Top