bpd-skyscraper-december-2024
roof-hugger-skyscraper-december-2024

Ron De Lugo Federal Courthouse

Petersen Aluminum
www.pac-clad.com
info@pac-clad.com

The Ron De Lugo Federal Courthouse in the U.S. Virgin Islands underwent a major repair and replacement of its roof. The 57,872 sq. ft., three-story federal building is located just a stone’s throw from the ocean in a beautiful bay in St. Thomas. The corrosive saltwater environment was the major factor in specifying Petersen Aluminum panels for the retrofit.

Approximately 24,000 sq. ft. of Petersen’s Tite-Loc Plus Panels finished in Colonial Red were utilized. The .040 aluminum panels were installed over the existing screw-down steel roof using the Roof Hugger retrofit framing system. Installation of the Petersen panels was completed by Therma Seal Roof Systems, Lake Park, Fla.

Panel testing for the high wind uplifts was a significant factor in the selection of Petersen, according to Dave Landis, architectural/technical sales manager. “We used Miami-Dade NOA engineering information to show the architect that the .040 aluminum panels would exceed the 130 mph wind load requirements for the job,” he said.

Architectural design for the project was created by C.J. Quinones Engineering, San Juan, Puerto Rico. The general contractor was Energy Solutions Division of Schneider Electric Building, Richmond, Va. The Petersen distributor on the project was ABC Supply.

For information on Roof Hugger, visit www.roofhugger.com.

About Petersen

Petersen Aluminum logoPetersen, a Carlisle company, manufactures PAC-CLAD architectural metal cladding systems in multiple gauges of steel and aluminum. PAC-CLAD products include wall panel systems, standing seam roof panel systems, vented and solid soffit panels, perforated metal, coil and flat sheet, composite panels, column covers, plus fascia and coping. All are available in a Kynar-based 70% PVDF Fluropon coating in 50 standard colors plus simulated finishes that include a 35-year finish warranty. Most colors meet LEED requirements and are rated by the Cool Roof Rating Council. Custom colors and weathertightness warranties are offered. BIM and CAD documents are available for most products. Founded in 1965, Petersen’s facilities are located in Illinois, Georgia, Texas, Maryland, Arizona and Washington. For information on the complete line of Petersen’s PAC-CLAD metal products, call 800-PAC-CLAD, visit www.pac-clad.com or write to info@pac-clad.com.

facebook40   twitter40    linkedin40    youtube40

^ Back To Top